Add ESPhome

ESPHome/config/.gitignore

@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml

ESPHome/config/common/minir4-local.yaml

@@ -0,0 +1,108 @@
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name}
+  comment: "Sonoff MiniR4 Extreme"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "SHWdMNPDac9CCz0UTRCwvPrc20nzCa/xjDanSw8LVWc="
+
+# Over-the-air Update
+ota:
+  - platform: esphome
+    id: myota
+    password: ${ota_password}
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${device_name}"
+    password: ${fallback_wifi_pwd}
+
+captive_portal:
+
+web_server:
+  port: 80
+
+sensor:
+  - platform: wifi_signal
+    name: ${friendly_name} Wifi Signal Strength
+    update_interval: 90s
+    entity_category: "diagnostic"
+
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    update_interval: 300s
+    entity_category: "diagnostic"
+
+text_sensor:
+  - platform: wifi_info
+    ssid:
+      name: Connected SSID
+    ip_address:
+      name: IP Address
+    dns_address:
+      name: DNS Address
+
+status_led:
+  pin:
+    number: GPIO19
+    inverted: true
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+
+switch:
+  - platform: restart
+    name: ${friendly_name} Restart
+
+output:
+  # Physical relay on GPIO
+  - platform: gpio
+    pin: GPIO26
+    id: relay_1
+
+light:
+  - platform: binary
+    id: light_1
+    name: ${friendly_name}
+    icon: mdi:ceiling-light-multiple-outline
+    restore_mode: restore_default_off
+    output: relay_1
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00
+    id: button
+    filters:
+      - invert:
+      - delayed_off: 50ms
+    on_press:
+      - light.toggle:
+          id: light_1
+
+  - platform: gpio
+    name: s1
+    pin: GPIO27
+    id: s1
+    filters:
+      - invert:
+      - delayed_off: 50ms
+    on_press:
+      - light.toggle:
+          id: light_1
+
+bluetooth_proxy:
+  active: ${bt_proxy}

ESPHome/config/common/minir4.yaml

@@ -0,0 +1,110 @@
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name}
+  comment: "Sonoff MiniR4 Extreme"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "SHWdMNPDac9CCz0UTRCwvPrc20nzCa/xjDanSw8LVWc="
+
+# Over-the-air Update
+ota:
+  - platform: esphome
+    id: myota
+    password: ${ota_password}
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${device_name}"
+    password: ${fallback_wifi_pwd}
+
+captive_portal:
+
+web_server:
+  port: 80
+
+sensor:
+  - platform: wifi_signal
+    name: ${friendly_name} Wifi Signal Strength
+    update_interval: 90s
+    entity_category: "diagnostic"
+
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    update_interval: 300s
+    entity_category: "diagnostic"
+
+text_sensor:
+  - platform: wifi_info
+    ssid:
+      name: Connected SSID
+    ip_address:
+      name: IP Address
+    dns_address:
+      name: DNS Address
+
+status_led:
+  pin:
+    number: GPIO19
+    inverted: true
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+
+switch:
+  - platform: restart
+    name: ${friendly_name} Restart
+
+output:
+  # Physical relay on GPIO
+  - platform: gpio
+    pin: GPIO26
+    id: relay_1
+
+light:
+  - platform: binary
+    id: light_1
+    name: ${friendly_name}
+    icon: mdi:ceiling-light-multiple-outline
+    restore_mode: restore_default_off
+    output: relay_1
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00
+    id: button
+    filters:
+      - invert:
+      - delayed_off: 50ms
+    on_press:
+      - light.toggle:
+          id: light_1
+
+  - platform: gpio
+    name: s1
+    pin: GPIO27
+    id: s1
+    filters:
+      - invert:
+      - delayed_off: 50ms
+    on_press:
+      - homeassistant.service:
+          service: light.toggle
+          data:
+            entity_id: ${light_entity}
+
+bluetooth_proxy:
+  active: ${bt_proxy}

ESPHome/config/minir4-5.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  device_name: mini-r4-5
+  friendly_name: mini-r4-5
+  ota_password: "2785ba00e63ab387e8e9fde3f2005eea"
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.deckenlampe_treppenhaus
+  bt_proxy: "true"
+
+packages:
+  minir4: !include common/minir4.yaml
+
+esphome:
+  on_boot:
+    - lambda: |-
+        id(myota).set_auth_password("2785ba00e63ab387e8e9fde3f2005eea");

ESPHome/config/minir4-8.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: mini-r4-8
+  friendly_name: mini-r4-8
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.deckenlampe_treppenhaus
+  bt_proxy: "true"
+
+packages:
+  minir4: !include common/minir4.yaml

ESPHome/config/schalter-bar.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: schalter-bar
+  friendly_name: Schalter Bar
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.barlampe
+  bt_proxy: "false"
+
+packages:
+  minir4: !include common/minir4.yaml

ESPHome/config/schalter-deckenlampe-th.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: schalter-deckenlampe-th
+  friendly_name: Schalter Deckenlampe Treppenhaus
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.deckenlampe_treppenhaus
+  bt_proxy: "false"
+
+packages:
+  minir4: !include common/minir4.yaml

ESPHome/config/schalter-diele.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: schalter-diele
+  friendly_name: Schalter Diele
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.deckenlampe_light
+  bt_proxy: "false"
+
+packages:
+  minir4: !include common/minir4.yaml

ESPHome/config/schalter-kitchen.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: schalter-kitchen
+  friendly_name: Schalter Küche
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.philips_915005996401_light
+  bt_proxy: "true"
+
+packages:
+  minir4: !include common/minir4.yaml

ESPHome/config/schalter-philipps-buero.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: schalter-philipps-buero
+  friendly_name: Schalter Philipps Büro
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  light_entity: light.deckenlampe_philipp_s_buro_light_2
+  bt_proxy: "false"
+
+packages:
+  minir4: !include common/minir4.yaml

ESPHome/config/schalter-treppenhaus-eg.yaml

@@ -0,0 +1,9 @@
+substitutions:
+  device_name: schalter-treppenhaus-eg
+  friendly_name: Treppenhaus EG
+  ota_password: !secret ota_password
+  fallback_wifi_pwd: !secret fallback_wifi_pwd
+  bt_proxy: "false"
+
+packages:
+  minir4: !include common/minir4-local.yaml

ESPHome/config/spiegel.yaml

@@ -0,0 +1,43 @@
+# Basic Config
+esphome:
+  name: spiegel
+  friendly_name: Spiegel
+
+esp8266:
+  board: esp01_1m
+
+logger:
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "8vthed/+UZgbq4lqrM7D8rVWBK47gYx6pkHVQgDCWSs="
+
+ota:
+  - platform: esphome
+    password: "1164b87ea7dde095f5240fea51f868c0"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Spiegel Fallback Hotspot"
+    password: "bUgByIWOhRHX"
+
+captive_portal:
+
+web_server:
+  port: 80
+
+# Device Specific Config
+output:
+  - platform: gpio
+    pin: GPIO4
+    id: shelly_1_relay
+
+light:
+  - platform: binary
+    name: "Spiegel"
+    output: shelly_1_relay
+    id: spiegel